The rubber lining of fittings is complex as it requires the rubber sheets to be precise cut and manually applied to meet the profile of the fittings, like bends, reducers, tees, etc. The workmanship at LeBracs Rubber ensures that the lining is done perfectly.
LeBracs Rubber has special equipment for the inner linings of pipes.
Vulcanization is carried out in the Autoclave.
SL.NO | Properties | Value | Value |
---|---|---|---|
COMPOUND CODE | LRL 3545 SM | LRL 4555 SM | |
1 | Type of Rubber | Soft Natural | Soft Natural |
2 | Hardness | 45± 5º Shore “A” | 50 ± 5º Shore “A” |
3 | Tensile Strength | 180 | 180 |
4 | Elongation at Break | 800 | 700 |
5 | 300 % Modulus | 24 | 32 |
6 | Tear Strength | 25 | 30 |
7 | Specific Gravity | 1.04± 0.02 | 1.07± 0.02 |
8 | Rebound Resilience | 60 | 50 |
9 | Abrasion Resistance | 100 | 160 |
10 | Maximum Design Temperature | 60 º “C” | 70 º “C” |
( Technical parameters may be changed due to continuous product development.)
Copyright © 2019 LeBracs Rubber (P) Ltd. All rights reserved.
Site by Ideas In A Flash - Powered by ZINFOMATIC